Filtration Equipment, Filters | TSI Filtration Technologies

Equipment:

The TSI Lint Collection Filter (LFC-1) is a compliment to any Commercial Laundry air system. Designed to remove moist lint from the air stream prior to exhausting the air; the modular design allows for the LCF-1 to be incorporated into new designs as well as efficiently being used in retrofit applications. The LCF-1 is designed to allow for variance in speed. This allows designers to control filtration efficiency as well as material loading capacities. The LCF consists of a rotating wheel with support spokes. The wheel is covered with an application appropriate screen mesh. The wheel is supported with two pedestal bearings and driven by a direct driven motor/gearbox combination with either a belt drive or a chain drive. The suction nozzle used to remove the lint includes a brush and an air nozzle to air in the release of the lint from the screen. The wheel is enclosed with a steel housing which includes access doors on both the clean and dirty side of the wheel. The access doors also include inspection ports for inspection during operation. The unit can be combined with an optional heating coil to recover waste heat from the dryers to pre-heat air or water for the Laundry.

Download the
Lint Collection Filter brochure and specifications in PDF format

Cellulose and Personal Care Industry

In manufacturingof personal care productssuch as paper or diapers, hygroscopic particlesand cellulose waste are produced. Withappropriately designed and selected equipmentthe recyclable material is returned into theproduction process and the waste is removed.

Textile Industry

In a cotton mill, fibers and dust particles areremoved from the cotton through the machineextract air system. The fibers can be separatedand recycled and the waste disposed of.

Glass Fiber Manufacturing

When manufacturing glass products shod fibersand dust waste are generated. Thesecontaminants must be removed prior todischarge of the air into the atmosphere. Specialfiltration and separation equipment will help toremove this waste from the air and eitherrecycle or dispose of it.

Coarse Particle Filtration

Pre-Filter/pre-separatorThe air stream loaded with particles passesthrough a pre-screen. The mesh size of thescreen can be adapted to the panicle size to beseparated.

Advantages

continuous cleaning, which equates to
no pressure fluctuations in the process
space saving installation
efficient separation of material usingdifferent mesh sizes

Fine Particle Filtration
Drum Filter

Dust laden air passes through a fine filter.Depending on the amount of solids and the filtersurface loading, a cake or mat is formed.Cleaning is done with a continuous vacuumprovided by suction nozzles.

Advantages

continuous self-cleaning, equates to nopressure fluctuations in the process
no compressed air required
high filtration efficiency
wide range of filter materials available


Home About Us Products Equipment Contact Us SPANISH Site Equipment: Lint Collection Filter The TSI Lint Collection Filter (LFC-1) is a compliment to any Commercial Laundry air system. Designed to remove moist lint from the air stream prior to exhausting the air; the modular design allows for the LCF-1 to be incorporated into new designs as well as efficiently being used in retrofit applications. The LCF-1 is designed to allow for variance in speed. This allows designers to control filtration efficiency as well as material loading capacities. The LCF consists of a rotating wheel with support spokes. The wheel is covered with an application appropriate screen mesh. The wheel is supported with two pedestal bearings and driven by a direct driven motor/gearbox combination with either a belt drive or a chain drive. The suction nozzle used to remove the lint includes a brush and an air nozzle to air in the release of the lint from the screen. The wheel is enclosed with a steel housing which includes access doors on both the clean and dirty side of the wheel. The access doors also include inspection ports for inspection during operation. The unit can be combined with an optional heating coil to recover waste heat from the dryers to pre-heat air or water for the Laundry. Download the Lint Collection Filter brochure and specifications in PDF format Cellulose and Personal Care Industry In manufacturingof personal care productssuch as paper or diapers, hygroscopic particlesand cellulose waste are produced. Withappropriately designed and selected equipmentthe recyclable material is returned into theproduction process and the waste is removed. Textile Industry In a cotton mill, fibers and dust particles areremoved from the cotton through the machineextract air system. The fibers can be separatedand recycled and the waste disposed of. Glass Fiber Manufacturing When manufacturing glass products shod fibersand dust waste are generated. Thesecontaminants must be removed prior todischarge of the air into the atmosphere. Specialfiltration and separation equipment will help toremove this waste from the air and eitherrecycle or dispose of it. Coarse Particle Filtration Pre-Filter/pre-separatorThe air stream loaded with particles passesthrough a pre-screen. The mesh size of thescreen can be adapted to the panicle size to beseparated. Advantages continuous cleaning, which equates to no pressure fluctuations in the process space saving installation efficient separation of material usingdifferent mesh sizes Fine Particle Filtration Drum Filter Dust laden air passes through a fine filter.Depending on the amount of solids and the filtersurface loading, a cake or mat is formed.Cleaning is done with a continuous vacuumprovided by suction nozzles. Advantages continuous self-cleaning, equates to nopressure fluctuations in the process no compressed air required high filtration efficiency wide range of filter materials available